An Ecodesign compliant fireplace
The result is a range of wood-
burning fireplaces that meet the
strictest European environmental
standards. The wood stoves in the Kalfire W range are eco-labelled A and A+, with an energy efficiency rating of up to 86%.
and in compliance with all applicable guidelines. Make sure you choose a recognized Kalfire dealer to install your fireplace. You can find one in your area on www.kalfire.com
Choice of fuel
When choosing wood to burn, keep in mind other aspects of sustainability:
for example, try to use domestic wood if possible to reduce the carbon footprint from transport. For the same reason, pay attention to the country of origin of your fireplace. Transport is still one of the largest contributors to CO2 emis-
sions and air pollution.
- Place the largest logs on the hearth, then lay a perpendicular row of smaller logs over these.
- Add a third layer of kindling.
- Lay one or more firelighters on top and light them.
- Always use untreated, clean,dry wood.
- Light the fire using the ‘top-down’ Swiss method.
- Start the fire in reverse from the conventional method and light it from above. This avoids smoke as the fire smoulders, preheats the chimney flue, and burns gases and smoke released by the wood below.
- Leave the door open for a few minutes until the wood is burning well, then close it.
- Do not add more wood until the logs have burned completely and a bed of embers has formed. One layer of wood is sufficient.
- Leave the secondary air supply partially or fully open during burning.
- When you no longer want to use the fire, let it cool down completely with the door closed.